Double Glazing Lock Repairs
The best locks for your windows and doors will help prevent burglars from getting into your home. They aren't likely to break glass or try to squeeze through windows.
However, some double-glazing owners have had problems with their door or window lock after it was installed. These problems can often be resolved without the need for a new double glazing.
Broken or Faulty Locks
If your uPVC window or door lock is damaged or broken and requires a locksmith, they can repair it for you. They can fix hinges, striker plates and locks for double-glazing. They will also be able to adjust the cylinder's position to fix any misalignment problems that could be causing your handle to not work properly.
The mechanism might be jammed if the key fits in the lock, but it will not turn or be difficult to insert. This can be caused by grime or dirt getting stuck in the mechanism. If this is the situation it could be possible for the lock to be cleaned and lubricated. It is important to use a dry lubricant, like graphite or teflon instead of oil which can attract dirt and adhere to the inside of the mechanism. After lubricating the lock, you should insert the key and try to turn it. The lubricant needs to be absorbed into the mechanism and the lock should spin effortlessly.
The loose screws inside the lock mechanism are another cause of a faulty lock. They can become loose and fall out or break off completely which can stop the lock from functioning properly. These screws can be tightened by using a screwdriver, but be careful not to over tighten them. This can damage the internal components.
A broken lock can be dangerous for both you and your family members particularly if you have young children. They can open the door without your knowledge which gives them access to your home. If you are worried about this happening, a vetted locksmith can provide a quick and efficient service to re-secure your double glazing doors.
Misty Glaze are a professional uPVC and double glazing company in Lancing and can repair any type of defective and broken mechanisms handles, handles, cylinders, and lock systems on uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your particular needs, which means that in many cases replacement windows and doors are not required.
Handles that are damaged or faulty
Many double-glazed windows have the multi-point lock as part of the overall security package. This is a great choice for those concerned with criminals who are looking to gain entry to your home. Ask your installer about antilift blocks. These can be installed alongside your existing locks and aid in keeping your windows closed.
Handle locks are often damaged or fail. They are the first part that criminals utilize to force open your window. The good news is that this is one of the easiest parts to fix.
Modern uPVC and aluminium handles feature a multi-point locking system called Espagnolette which is designed to withstand forced entry. This security upgrade is usually provided as an additional option on new uPVC window installation. As an upgrade option, older aluminium or uPVC handles that are no longer used can be upgraded to the shoot bolt locking system.
It is crucial to fix the handle as soon as you can if it's damaged. The damaged handles could stop the window from closing properly and permit drafts to get in. Nottingham window repairs could also be a weakness that thieves can exploit, putting your family's belongings and your personal belongings at risk.
To repair the damaged mechanism, you must first access the window frame and then remove the broken handle. The gearbox that opens the handle is removed and the type of gear is identified so a replacement can be found that is in line with the profile of the internal window frame mechanism.
After the mechanism has been replaced, the handle may be reattached using the original screws. However, we recommend replacing them with more long screws since they provide a more secure fit. The final step is to apply a layer of clear sealant to protect the handle from further corrosion. Once that's done the window will be operational again, and at a fraction of the cost of replacing the entire window.
Hinges that are broken or faulty
If your windows don't shut properly, you could suffer from draughts or the weakening of your home's security barrier, and an increased chance of damp or water damage. Windows hinges that break or become faulty are a common issue and can be easily repaired.
If you have a uPVC windows that isn't able to open or close it's likely that the hinges are broken or damaged and require replacement. While many window companies require you to purchase a new window to resolve this simple issue, we're able to replace the faulty hinges and save you money.
Window hinges can be damaged by repeated use, or weakening over time due to corrosion. In the event of a broken hinge, it's crucial to take precautions to avoid further damage by being careful not to make the window swing to close or open.
The type of hinge you are looking for will help you locate the right parts to repair it. Maco, Mila and Roto are all brands of window hinges. Consult a professional to avoid purchasing parts that will not work with your existing hardware. This can result in further damage.
A damaged hinge can be a big issue for your uPVC windows and doors. They can be a significant source of noise and can also allow for water infiltration that can cause damage to your windows.
To resolve this issue, first check that the pin barrel on both sides of the hinge is aligned. If it isn't tapping the headpin, use the hammer to make a slight bend in the hinge barrel. This will keep the pin in its place. Then, ask a friend to hold the door while you remove the hinges and hinge screws from both the doorjamb as well as the door. Replace the hinges with those that are the same size and install the screws with glue. Finally, secure the hinges with weights or clamps while the glue is drying.
Once the hinges have been fixed, you should be able to install the door and re-attach the handle. Replace the screws with wooden dowels that are the same length as the screw that was used to ensure that they match.
Glass that is broken or is damaged
uPVC Windows can be damaged over time, even though they are great at keeping out the cold and retaining the heat. This can include broken or damaged glass as well as defective locks. If neglected, this could become a very costly issue. It can also hurt the aesthetics of your home and result in a decrease in insulation. It is essential to fix any damage as soon as it occurs.
You can repair the crack in your glass yourself if you have the proper tools and techniques. Be sure that the area surrounding the broken glass is free of debris, so that pieces of glass do not cause injuries or cause a trip hazard. After that, take away all broken glass pieces and dispose of them in a appropriate way. Then, apply masking tape over the entire area to keep shards from scattering and sticking to your skin when you move them. Pre-fitting the glass pane prior to applying glue is a good idea in the case of windows with two panes. This will ensure you have enough space to complete your project.
Use a clean, dry cloth to wipe clean the surface of the broken glass and the frame prior to applying the glue. Follow the curing and application instructions, which may vary from product-to-product. You may have to clamp the cracked glass with lightweight clamps designed to hold delicate materials, depending on the angle.
After the adhesive has completely cure, carefully insert the glass in the window frame. Make sure it's aligned with the frame's edge and that there aren't any gaps between the glass sash as well as the frame. Avoid flexing the glass as you reinstall it because this could weaken the seal. This could result in condensation or water infiltration.
Get in touch with a professional glazier, such as O'Brien(r) for an appointment to replace your glass if the window is completely broken. It's crucial to act fast if you have broken glass.